0 Dremel 220-01 Rotary Tool Work Station

Review Dremel 220-01 Rotary Tool Work Station

Buy Cheap Dremel 220-01 Rotary Tool Work Station From Here Now!
Turn that Dremel rotary tool into a drill press with this rotary tool workstation from Dremel. The station accepts several Dremel models to drill perpendicular and angled holes in 15-degree increments from 90 degrees vertical to 90 degrees horizontal. Inch and metric markings on the base make for accurate drilling of workpieces. Depth markings with depth stop provide consistent depth adjustment, while the sturdy metal base with four clamping points holds workpieces securely in place. The workstation also holds the rotary tool steady for other tasks, such as polishing metal objects, sanding different shapes and grinding metal pieces--with greater precision and less fatigue. The station's telescoping shaft allows adjustments to any height between 16 and 29 inches. On-board storage for drill bits, cords, and wrenches keep them all in handy reach. --Brian D. Olson

What's in the Box
Work station, accessory nest, mounting wrench, instructions
Readmore

Technical Details

- Dremel rotary tool work station; fits Dremel models 275, 285, 300, 395, 398, 400 XPR, 780, and 800
- Converts Dremel rotary tool to drill press; drills at 90 degree vertical angle and in 15-degree increments to 90 degrees horizontal
- Study metal base with
- Includes work station, mounting wrench, instructions; rotary tool not included
- 56-square inch base; 1-year limited warranty
See more technical details

 "Worst. Assembly. Instructions. Ever." 2010-09-21
By Elizabeth Tolbert (Saint Paul, MN)
I bought this workstation to use as a drill press for my crafts business. I consider myself relatively handy and intelligent and the instructions could not have been more worthless. Bad graphics, poor wording. I was able to "successfully" assemble it only after lucking out at the local hardware superstore where they had a Dremel demo last weekend. The nice guy running the demo took one out of the box for me and helped me set it up. He agreed the instructions were, uh, lacking. Also recommended that I use plumbers' tape to fix the wobbliness of the tube assembly. Overall this piece is useful but it's also a big disappointment. C'mon Dremel, you can do way better.



p.s. The packaging and such may not list it, but this *does* accommodate the Dremel 4000 Series.

 "Misleading and Poor Quality" 2010-09-18
By Grant Mason (San Diego, Calif. USA)
This product says that it will fit a Dremel 395. My problem is that the Dremel I am in possession of is a model 395 circa 1984. The Dremel I have has a different body style than the current 395's and will not fit the drill press. I can understand this mistake but it would have saved me time and money spent to know this detail. As for the press itself it is definitely of budget construction. The assembly is pretty simple but that is after you interpret the poorly written and skimpy instructions. All-in-all you get something that should be priced around $40.00 and in today's world that is not saying much. The old Dremel in my possession is still going strong after 26 years; I don't think this drill press will have much worth after the same amount of time except as scrap metal and plastic.

 "Just Great!" 2010-08-22
By Judy Cantwell
This Dremel Work Station is just great! It is wonderful for our Dremel needs and is exactly what we wanted. AND...the price is so much cheaper than in the stores around here. We happeneded to be in the local craftman's store the other day and saw the identical item for over sixty dollars more! We love Amazon!

 "Great item, but not perfect" 2010-08-16
By el cranki (mexico)
this iem is really versatile and well built, but the only problem i've found is that it aint as "tight" as it would appear, when you use it as a drill press the tip of the drill may go a few milimeters sideways when it touches his objetive

 "Dremel Work Station Review" 2010-07-21
By Thomas M. Hubisz (Saugus, Ma, US)
I recently purchased a Dremel workstation. The project of the moment required me to use it as a drill press, with the help of a home-made jig. I found the tool to be excellent, except for a tendency for the bit to wander when the wood grain was uneven. This, even though I used a brad point bit. The fact that the tool holder allows deflection, may cause the serious craftsman to seek a more expensive/precise alternative.


Images Product

Buy Dremel 220-01 Rotary Tool Work Station Now
Buy Dremel 220-01 Rotary Tool Work Station |
Cheap Dremel 220-01 Rotary Tool Work Station | Low Price Dremel 220-01 Rotary Tool Work Station | Best Dremel 220-01 Rotary Tool Work Station | Order Dremel 220-01 Rotary Tool Work Station | Good Dremel 220-01 Rotary Tool Work Station | Lowest Dremel 220-01 Rotary Tool Work Station | Save Dremel 220-01 Rotary Tool Work Station | Discount Dremel 220-01 Rotary Tool Work Station | Purchase Dremel 220-01 Rotary Tool Work Station | Shop Dremel 220-01 Rotary Tool Work Station | Buying Dremel 220-01 Rotary Tool Work Station | Where Dremel 220-01 Rotary Tool Work Station

0 Dremel 565 Multi Purpose Cutting Kit 565D

Review Dremel 565 Multi Purpose Cutting Kit 565D

Buy Cheap Dremel 565 Multi Purpose Cutting Kit 565D From Here Now!
The drywall bits allow you to quickly cut drywall for electrical boxes, air vents and other wall features. It's best to use drywall bits in a clockwise direction. The multipurpose cutting bit prepares an area for light fixtures and ceiling fans and makes cut-outs in cabinets, paneling and fiberglass. Includes: a cutting guide attachment; two drywall cutting bits; and one multipurpose bit.
Readmore

Technical Details

- Includes cutting guide, 2-No. 560 drywall cutting bits and 1-No. 561 multipurpose cutting bit
- Useful for making cuts in a variety of materials including drywall, wood, plastic, fiberglass, ceiling tiles, laminates and vinyl siding
- Cutting guide allows for a sturdy controlled cut with maximum visibility, and has easy depth adjustment
- Rotary tool not included
- For use with rotary tool models 275, 285, 395, 398 and 780
See more technical details

 "okay for small jobs" 2010-05-12
By duckface (california, USA)
this item is only good for small jobs. i found that you have to tighten the collet nut down pretty tight if you are cutting something big (over 1/2 inch thinkness) because if you don't the bit will loosen up. also it cuts at an angle because when you tighten down the screw thing that adjusts the height it puts it at an angle. had a hard time cutting 1/2 thick piece of wood with it so only for small jobs.

 "Nice, wish I bought this years ago" 2010-05-06
By Geew1z (Ohio)
I haven't used this a ton yet, but have cut some drywall with it and I think its great. Very easy to take on and off the dremel, very easy to adjust how deep you want the cut too.



Of course you can cut drywall without this tool, but now that I have it and see how easy it is to control the dremel this way, I would not want to go back to not having it

 "Compatible models" 2010-01-19
By Ryan Coutant (Bergen County, NJ, US)
I had to check out Dremel's website for an accurate list of models this attachment works with:



* Fits Tool Model 400, 398, 395, 300, 285, 275, 200, 100, 800, 780



[...]

 "must have attachment for dremel" 2009-12-21
By Raymond Garces
I have this attachment for my mastercraft rotary tool. It fits. I am doing renos in my basement and it's a must have if you need to do cutouts for outlets. I don't particularly like the drywall bit. But I use the multipurpose cutter bit instead.

 "Had good use of it." 2009-11-07
By VKesani (NJ)
I do not remember how much I paid but remember I used it enough. Still have it but not using as I am not home owner any more.


Images Product

Buy Dremel 565 Multi Purpose Cutting Kit 565D Now
Buy Dremel 565 Multi Purpose Cutting Kit 565D |
Cheap Dremel 565 Multi Purpose Cutting Kit 565D | Low Price Dremel 565 Multi Purpose Cutting Kit 565D | Best Dremel 565 Multi Purpose Cutting Kit 565D | Order Dremel 565 Multi Purpose Cutting Kit 565D | Good Dremel 565 Multi Purpose Cutting Kit 565D | Lowest Dremel 565 Multi Purpose Cutting Kit 565D | Save Dremel 565 Multi Purpose Cutting Kit 565D | Discount Dremel 565 Multi Purpose Cutting Kit 565D | Purchase Dremel 565 Multi Purpose Cutting Kit 565D | Shop Dremel 565 Multi Purpose Cutting Kit 565D | Buying Dremel 565 Multi Purpose Cutting Kit 565D | Where Dremel 565 Multi Purpose Cutting Kit 565D

0 Milescraft 1000 Plunger turns your Rotary Tool into a plunge router

Review Milescraft 1000 Plunger turns your Rotary Tool into a plunge router

Buy Cheap Milescraft 1000 Plunger turns your Rotary Tool into a plunge router From Here Now!
Convert your rotary tool into a mini plunge router with the TurnLOCK Rotary Tool Plunger. Convert most rotary tools into a small plunge router. Clear base for optimal visibility TurnLock Technology Center of base accepts TurnLock Bushings Perfect for use with the Design/Inlay Kit and other small scale template routing. Plunger automatically locks on its way down. Easy touch-release. Vacuum tube allows Plunger to work virtually free from woodchips. Edge and circle guide allow accurate parallel and circle cuts.
Readmore

Technical Details

- Milescraft Plunger converts most rotary tools into a plunge router, including Dremel, Black and Decker, and Craftsman models
- The plunger automatically locks on its way down and features edge and circle guide allow accurate parallel and circle cuts
- Features easy-grip handles for comfort while working
- Includes a clear TurnLock base for optimal visibility
- The integrated vacuum tube allows Plunger to work virtually free from woodchips
See more technical details

 "Not a quality item" 2007-10-04
By P. Hsu (Yorba Linda, CA USA)
This router attachment for Dremel is very poorly made. The plastic flexes a lot. The three pole design doesn't really add any stability because the material is so flimsy. The height adjustment is simply a plastic bar which offers no accuracy at all. Bottom line, this item so cheaply made that it's almost unusable. The 'real' Dremel 335 router attachment is a way better product then this Milescraft knock off with only couple dollars more. I've returned this attachment and got a real Dremel one.

 "Very handy for detail work" 2007-08-23
By Tim Price (Austin, TX)
I only have one issue and that is that you can't see you work after about 5 seconds, but I set a fan right next to the job and that seems to work well. Fantastic for small detail work.

 "Wonderful way to get a small router" 2006-08-22
By T. BOHACEK (Haymarket, VA United States)
This tool plunger turned my Dremel tool into a samll compact Plunge router. It is great for free hand work such as signs etc. It is very light weight to use and provides an economical solution if one already owns a Dremel.

 "Rotary Tool Plunger" 2006-02-18
By Fast Fredd
Works good on large flat areas. Too large a 'platform' for tight areas.


Images Product

Buy Milescraft 1000 Plunger turns your Rotary Tool into a plunge router Now
Buy Milescraft 1000 Plunger turns your Rotary Tool into a plunge router |
Cheap Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Low Price Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Best Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Order Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Good Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Lowest Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Save Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Discount Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Purchase Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Shop Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Buying Milescraft 1000 Plunger turns your Rotary Tool into a plunge router | Where Milescraft 1000 Plunger turns your Rotary Tool into a plunge router

0 Dremel 692 6-Piece Router Bit Set

Review Dremel 692 6-Piece Router Bit Set

Buy Cheap Dremel 692 6-Piece Router Bit Set From Here Now!
Route, edge, mortise or inlay with this versatile set of bits made just the right size for rotary tools. They’re made of high-speed steel, a step down from the preferable carbide tips, but they’re plenty tough enough to do the job. You’ll find endless uses for the straight bits, and the piloted edge bits with add that extra class to any wood project. It’s a nice assortment, we think, and only lacks a nice, classic Roman ogee. How about it, Dremel?--Kris Jensen-Van Heste
Readmore

Technical Details

See more technical details

 "Love these Dremel Products - but they are expensive!" 2010-08-20
By Jim (Warner Robins, Georgia)
I have used them for many years - normally for small inside jobs. Quiet and effective - but expensive.

 "Enhancement" 2010-07-05
By Wesley W. Byas (Belton, TX USA)
These bits have added to my Dremel set in ways that have been most helpful.

 "Dremel 692 6 Piece Router Bit Set" 2010-04-28
By Richard E. Theobald
Haven't used them yet but from the looks of them they seem fairly sturdy. Have other Dremel products and have always had a good experience with them.

 "Useful bits" 2009-10-21
By Monkey Dad (El Cerrito, CA)
Fast shipping. I've used the bits to cut small channels so far. They work well as long you only try to cut a small depth. I found that for harder woods about 1/16 inch at time works well.

 "Dremel Router Bits" 2009-10-07
By John D. Zay (Memphis, TN)
I used the round over bit to finish off some wooden puzzles. It performed very well. Limitations of the Dremel and the bits means you have to be careful with the feed rate. However, the bit performed very well.


Images Product

Buy Dremel 692 6-Piece Router Bit Set Now
Buy Dremel 692 6-Piece Router Bit Set |
Cheap Dremel 692 6-Piece Router Bit Set | Low Price Dremel 692 6-Piece Router Bit Set | Best Dremel 692 6-Piece Router Bit Set | Order Dremel 692 6-Piece Router Bit Set | Good Dremel 692 6-Piece Router Bit Set | Lowest Dremel 692 6-Piece Router Bit Set | Save Dremel 692 6-Piece Router Bit Set | Discount Dremel 692 6-Piece Router Bit Set | Purchase Dremel 692 6-Piece Router Bit Set | Shop Dremel 692 6-Piece Router Bit Set | Buying Dremel 692 6-Piece Router Bit Set | Where Dremel 692 6-Piece Router Bit Set

0 Dremel Attachments & Accessories Collection

Review Dremel Attachments & Accessories Collection

Buy Cheap Dremel Attachments & Accessories Collection From Here Now!

Readmore

Technical Details

See more technical details

Images Product

Buy Dremel Attachments & Accessories Collection Now
Buy Dremel Attachments & Accessories Collection |
Cheap Dremel Attachments & Accessories Collection | Low Price Dremel Attachments & Accessories Collection | Best Dremel Attachments & Accessories Collection | Order Dremel Attachments & Accessories Collection | Good Dremel Attachments & Accessories Collection | Lowest Dremel Attachments & Accessories Collection | Save Dremel Attachments & Accessories Collection | Discount Dremel Attachments & Accessories Collection | Purchase Dremel Attachments & Accessories Collection | Shop Dremel Attachments & Accessories Collection | Buying Dremel Attachments & Accessories Collection | Where Dremel Attachments & Accessories Collection

1 Dremel 335-01 Plunge Router Attachment

Review Dremel 335-01 Plunge Router Attachment

Buy Cheap Dremel 335-01 Plunge Router Attachment From Here Now!
Anyone who's ever used a router understands the satisfaction that a cleanly cut rabbet or mortise can give. But if you're working on small-scale projects, such as jewelry boxes or models, that monster three-horsepower fixed-base router with the 1/2-inch bit is simply overkill. That's where the Dremel 335 comes in. This plunge-router adapter is meant to be used with the Dremel rotary tools (models 400, 398, 395, 300, 285, and 275), which accommodate 1/8-inch diameter bits. If you already own one of these tools, buying the attachment is a great way to get an instant router without having to shell out the extra forty or fifty bucks for a single-purpose machine (that may be too big for what you're doing anyway). Assembling the attachment is simple: just remove the housing cap from your Dremel, reassemble the collet nut, then place the tool into the router attachment. The tool is secured in the attachment with a mounting nut and wrench (both included). The attachment features two plunge depths, which are locked in via a rotary hand grip. Setting routing depth can be a little tricky: it's a good idea to practice on scrap until you get a feel for it. The clear base gives you good stability and lets you see exactly what you're doing, as does the narrow profile of the Dremel tool itself. The attachment also includes an adjustable edge guide that works very well. If you're working on small projects are willing to experiment with the settings, this is the router for you.
Readmore

Technical Details

- Plunge router attachment for Dremel rotary tool models 400, 398, 395, 300, 285, and 275
- Quickly converts rotary tool to plunge router; plunge lock-in handle; 2 depth stops for rapid depth adjustments
- Plastic and metal construction
- Includes plunge router attachment, edge guide, circle cutting guide, mounting wrench, manual
- 6 by 5-1/2 inches; 1-year warranty
See more technical details

 "Flimsy construction is inadequate" 2010-09-06
By Seth
Dremel router bits are small, for fine, delicate work. However, because of the plastic construction and one-sided locking of this tool, it lacks the accuracy required. Getting a precise depth setting is difficult, and the tool does not stay square to the work surface. With caution, it will do the job, but not as well as I would expect.

 "Dremel Plunge Router Base Poor Design" 2010-07-17
By David A. Watkins (Geneso, IL USA)
Do not waste your money on this poorly made plunge router base. I found that the cheap plastic construction allowed the Dremel to wobble thus making accurate cuts, especially straight lines very dificult. When lowering the Dremel using the plunge feature, one side or the other will stick and cause the whole assembly to bind. I threw this base in the trash and bought Stewmac's metal router base that has an air blower accessary which is a great system. You can make clear plastic special purpose bases and attach them easily to the Stewmac. I build guitars so accuracy is important.

 "Nice idea, poor execution" 2010-05-26
By Barry E. Russ
Well, I just loved this thing for about a year, then the screw to hold the depth constant, the handle screw, not the depth screw completely failed. Now I can only use it as a plunge router. It will not hold for a set depth anymore. That makes for a very limited tool. I have read the reviews for the alternate "knockoff" version, and am not impressed, so I'll guess I'll have to bite the bullet and buy another one like this. I would gladly pay double for a unit that is built better, because I end up buying 2 instead of having one good one. That one will eventually fail too.

 "DOES work with Dremel 10.8V Li Ion cordless" 2010-04-30
By ISaidThat (USA)
It turns out that this DOES work with the Dremel 10.8 v Li Ion model (AKA, the 800 or 8000 model)! The literature that came with my cordless Dremel claimed that the two don't work together. However, I nervously purchased the plunge router attachment from a Home Depot which was advertising the two as working together and it turns out that they do! I just tried it and the cordless model screwed into the attachment perfectly. I routed several grooves successfully using the plunge router and the included edge guide.



My biggest complaint is the following: The clamps that secure the edge guide are not very secure, so the guide slowly slipped without my realizing it, resulting in about a 1-2 mm difference in the location of the groove I was cutting between start and finish on one piece of wood. Once I knew that this was I risk, I was just very careful to tighten all the clamps as much as I possibly could and it didn't happen again.



It would also be nice to have an easier method of adjusting and measuring the depth and distance along the edge guide without having to use external measurement tools.



Make sure you take note of the depth lock on the handle. It's very useful for locking in a depth without having to hold down the router against the springs.



Other than that, it works as I would expect it to and I'm pleased with my purchase. Although I have the router bit collection, I so far have only used the attachment with one of the high speed carving bits to make a pencil thin decorative groove in the edge of a picture frame. I was only using basswood, so I can't say how it would stand up to a more strenuous challenge.

 "Nice idea, doesn't really work" 2010-04-29
By Andrew Jackson (MD, USA)
This attachment sounded perfect for the model making and dolls' house building I want to do. Thought I'd be able to do some nice box joints with an appropriate jig. Some problems - (1) you can't use standard screw in guide bushings, (2) even if you could get the bit centered on the base, it moves when you cut, so you get wiggly cuts, even with the edge guide (this is presumably why they don't give you guide bushings with any kind of tolerance).



Save you money towards a real router.


Images Product

Buy Dremel 335-01 Plunge Router Attachment Now
Buy Dremel 335-01 Plunge Router Attachment |
Cheap Dremel 335-01 Plunge Router Attachment | Low Price Dremel 335-01 Plunge Router Attachment | Best Dremel 335-01 Plunge Router Attachment | Order Dremel 335-01 Plunge Router Attachment | Good Dremel 335-01 Plunge Router Attachment | Lowest Dremel 335-01 Plunge Router Attachment | Save Dremel 335-01 Plunge Router Attachment | Discount Dremel 335-01 Plunge Router Attachment | Purchase Dremel 335-01 Plunge Router Attachment | Shop Dremel 335-01 Plunge Router Attachment | Buying Dremel 335-01 Plunge Router Attachment | Where Dremel 335-01 Plunge Router Attachment