Buy Cheap Dremel 220-01 Rotary Tool Work Station From Here Now!
For precision drilling, routing, grooving. 6" square work surface. Articulating tool holder allows user to drill at 90 vertical and increments of 15 up to 90 horizontal. Holds tool at 90 horizontal for polishing and sanding. Telescoping flex shaft tool st
Readmore
Technical Details
- Dremel rotary tool work station; fits Dremel models 275, 285, 300, 395, 398, 400 XPR, 780, and 800- Converts Dremel rotary tool to drill press; drills at 90 degree vertical angle and in 15-degree increments to 90 degrees horizontal
- Study metal base with
- Includes work station, mounting wrench, instructions; rotary tool not included
- 56-square inch base; 1-year limited warranty
See more technical details
By Ytai Ben-tsvi (Tel-Aviv, Israel)
I'm using it for drilling tiny (0.6mm) holes in PCBs. I manage to drill them very precisely, no more than 0.1mm offset just by hand, and without and optical devices. Compared to an integral drill press, this one is very cheap and light, but nevertheless rigid and comfortable.
BTW, I'm using a Dremel clone, and before buying I was concerned whether this would fit. The answer is that the attachment is done by the threaded nose of the tool. If yours has the same threading, you should have no problems.
By Mark A. Chaddon (Bloomington, IL. USA)
The assembly of this tool took no more than 30 minutes which included reading the included manual.
The use if this tool is mostly intuitive and easy to setup and use. I have used the work station 2 or 3 times since I received it last month Jan 2010. It works great. I would highly recommend this product.
By Matt Service (Michigan)
I love it's multi purpose features.
The fact alone that it can hold my heavy rotary tool so I can use the flex shaft easier makes me give this workstation five stars.
I haven't used it as an actual drill press yet, but I've used it for all the other uses listed and shown.
I have also used it as a reverse router table. Be careful if you use it this way too, because the bit is a little more exposed to your hands compared to a normal router table. But I love that I can see what the router bit is doing to the top of the piece of wood I am working on. Just set the rotary tool to the depth you want and rout away!
By D. Quinn (New Salisbury Indiana)
Got the machine got the attachments now have the stand set my husband up with a work station that does it all and does not take up much room and keeps him busy lol Amazon your a great place to shop for anything I need. Thank you
By Mr. Rajvikram Singh (San Diego)
I disagree with Kandoro. He's obviously not read the post by J. Blackthorne clearly .. I received my unit last week and was definitely perplexed about the fact that my 395 (apparently supported by the unit) was way too small. There were no real mounting brackets to hold the unit firmly in place other than the coupling nut at the bottom. There has to be an adapter .. otherwise this is either bad engineering or bad marketing.
I am not really going to use it for anything high-precision but I do need tight enough tolerance for drilling holes close to each other. I cannot use the 220-01 station reliably .. intend to modify it to hold my dremel tool. And if I can't .. I'm returning it.
Images Product
Buy Dremel 220-01 Rotary Tool Work Station Now
Buy Dremel 220-01 Rotary Tool Work Station |
Cheap Dremel 220-01 Rotary Tool Work Station | Low Price Dremel 220-01 Rotary Tool Work Station | Best Dremel 220-01 Rotary Tool Work Station | Order Dremel 220-01 Rotary Tool Work Station | Good Dremel 220-01 Rotary Tool Work Station | Lowest Dremel 220-01 Rotary Tool Work Station | Save Dremel 220-01 Rotary Tool Work Station | Discount Dremel 220-01 Rotary Tool Work Station | Purchase Dremel 220-01 Rotary Tool Work Station | Shop Dremel 220-01 Rotary Tool Work Station | Buying Dremel 220-01 Rotary Tool Work Station | Where Dremel 220-01 Rotary Tool Work Station
0 comments:
Post a Comment